免费 无码 国产在线观看AV_日韩成人在线中文字幕_美国一区二区毛片在线看_午夜影院一区二区三区_厨房激战大乳熟女_mdapptv传媒免费观看_日韩 国产 亚洲 欧美_亚洲AV无码小电影_久一精品视频在线观看_宅男宅女精品国产av

加熱器功率：?jiǎn)蜗?220V50Hz, 4.5KW(-5%~+10%)
耐壓 1800V/3S,漏電電流<20Ma
加熱管外部采用鑄鋁壓鑄成型
電源線線長 3 米,外包覆鐵氟龍?zhí)坠?br>

Heater power: single-phase 220V 50Hz, 4.5KW(-5%~+10%)
Withstand voltage 1800V/3S, leakage current<; 20Ma
The exterior of the heating tube is formed by die casting cast aluminum
The power cord is 3 meters long and wrapped in a PTFE sleeve

采用 SUS316L 潔凈管盤制成型
進出液口徑為 3/8,使用變徑卡套接頭轉換
使用藥液流量：1L/min

Made of SUS316L clean tube tray for molding
The inlet and outlet diameter is 3/8, and a variable diameter sleeve connector is used for conversion
Flow rate of medication: 1L/min

采用 SUS304 材質，厚度 2MM 焊接成型，緊固螺絲采用 SUS304 不銹鋼螺栓
密封圈采用半氟密封圈

Made of SUS304 material, welded to a thickness of 2MM, with SUS304 stainless steel bolts used for fastening screws
The sealing ring adopts a semi fluorinated sealing ring

采用 SUS304 材質，厚度 2MM 焊接成型，緊固螺絲采用 SUS304 不銹鋼螺栓
密封圈采用半氟密封圈

Made of SUS304 material, welded to a thickness of 2MM, with SUS304 stainless steel bolts used for fastening screws
The sealing ring adopts a semi fluorinated sealing ring

1.安裝有 K 型熱電偶檢測加熱器主體溫度，數量 1 條
2.加熱器主體安裝有跳躍式溫度保護開關，溫度 125℃，數量 1 個
3.出液端安裝有 K 型熱電偶，檢測出液溫度，數量 1 條
4.加熱器主體內部設置有 N2 氣進出口，1/4 管螺紋接口，N2 的使用壓力 0.05~0.1MPa

1. Install K-type thermocouple to detect the temperature of the heater body, quantity 1
2. The heater body is equipped with a jump type temperature protection switch, with a temperature of 125 ℃ and a quantity of 1
3. There is a K-type thermocouple installed at the liquid outlet to detect the temperature of the liquid, with a quantity of 1
4. The heater body is equipped with N2 gas inlet and outlet, 1/4 pipe threaded interface, and N2 usage pressure of 0.05~0.1MPa

1.產品禁止干燒，必須將溫度開關接入控制電路中。
2.產品可靠接地。
3.安裝加熱器時，請緊固加熱器主體上所有卡套接頭。

1. Dry burning is prohibited for the product, and the temperature switch must be connected to the control circuit.
2. The product is reliably grounded.
3. When installing the heater, please tighten all the sleeve joints on the heater body.